National Patents Automatic Machine Waste Pyrolysis Fuel Oil

Introduction of Shangqiu Sihai Energy Technology Co., Ltd

We make waste rubber, waste plastics, waste tires and other waste pyrolysis refining fuel oil equipment as the company's traditional products. We have launched a new waste solid and waste liquid common combined unit based on the original, which solved the industry's one-time oil problems. Our equipments have high utilization of waste and can meet the many advanced countries at home and abroad environmental requirements. The produced oil can close to the national standard and be directly used in gasoline vehicles and diesel vehicles. Taking harmless, resource and comprehensive utilization treatment system of municipal solid waste as the main products is the first domestic.

Features of National Patents Automatic Machine Waste Pyrolysis Fuel Oil
a. In the design of pyrolysis key device, completely overcome the local heat uneven, easy to break, low yield, short life and other unfavorable factors of the current vertical flat bottom pyrolysis plant.

b. With fast and practical feed and slag system.

c. Efficient gas Heating System. In the process of refining, when the heated gas reaches 150 degrees Celsius, it will produce a lot of gas which can not be liquefied in normal temperature and pressure methane to butane.These gases are fully burned by specially designed gas nozzles, will produce a lot of energy which greatly saves energy.

d.Flue dust removal system has a desulfurization dust cather(qualified), equipped with two ways water impact cyclone dust removal chamber, which can ensure the discharge of flue outlet reach safe discharge standard.

Technical Parameters of National Patents Automatic Machine Waste Pyrolysis Fuel Oil

Model	Raw material	Structure form	Cooling system
LJ-9	Waste tire, plastic, rubber	Horizontal	Water cooling
Heating method	Oil output rate	Power	Installation
Directly	45%	15.5KW	Foundation
24 hours processing capacity	24 hours oil output	Work pressure	Host speed
8-10 tons raw materials	3.2-4.5 tons fuel oil	Atmospheric	0.4r\min
Transport	Reactor size	Working form	Weight of reactor
External gear drive	2200*6600mm	Batch	29 tons

Working process of National Patents Automatic Machine Waste Pyrolysis Fuel Oil

First, the raw materials are put into the reactor, and then seal the feeding in door, later start the machine and the reactor will be rotating and heated by coal, natural gas, wood or electricity. When the temperature reaches the degree of 250 to 280, we will get the crude oil, the oil steam will be continuous produced until the temperature reaches 350-460°C; oil steam will flow through oil gas separator, light component will enter the condensers and meanwhile the heavy oil will be discharged automatically into in heavy oil tank. The liquefied part will be condensed as crude oil, and the part which cannot be liquefied will be transferred by the water seal back to the burning chamber to be reused as heating material.

Treatment of the raw material

↓

Hydraulic automatic feeding in

↓

Automatic slag-out ← pyrolyzer → desulphurization and deduster

↓ ↓

Air package draft fan

↓ ↓

1^st tube condenser first 2^nd purifier

↓ ↓

2^nd tube condenser second 2^nd purifier

↓ ↓

Cooling tower ← calandria condenser emission reach the standard

↓

Oil and gas separator product oil

↓

Water seal explosion-proof machine

Shangqiu Sihai Energy Technology Co., Ltd. after-sales service guarantee:

1. On the day of receipt of the prepayment of the equipment, technical personnel will be arranged to guide the foundation on the spot within one week.

2.Delivery is 15~20 days from the date of receipt of the advance payment, and technical personnel are sent to the site for free guidance, installation, commissioning and training on the same day or within three days of shipment to ensure that the machine can return after normal operation.

3. Lifetime warranty.

4. Different raw materials need the same machine, mainly because there are some differences in the cracking process. Our technicians will provide you with free operation training. You can also send raw material samples to our company to make free oil rate tests on your raw materials.

Contact us if you need more details on Pyrolysis Plant to Fuel Oil. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Pyrolytic Machine to Carbon Black、Cracking Equipment to Steel Wire. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Waste Plastic Pyrolysis Plant